Also suitable with the after-sales repair replacement of CR touch CR-Touch is a 3D printer platform levelling solution developed by Creality based on hundreds of millions of user data used by the developers. Compared with traditional auto-levelling, it is compatible with more 3D printer platforms, more stable and cost-effective. Multipoint detection & smart balancing The CR-Touch levelling sensor performs multi-point detection on the print platform and records the height of each detection point. The system creates a virtual plane based on the elevation of each point and calculates the tilt angle between the nozzle and the platform to automatically compensate for different points. Quality that lasts High quality guarantees a long service life of more than 100,000 uses. More durable metal probes The CR-Touch has a metal probe that reduces wear and significantly increases its lifespan. High Precision Electromagnetic Components & Photoelectric Sensor After switching on the electromagnetic component, the probe is extended. When the probe touches the printing platform, the photoelectric sensor on the circuit board detects the contact signal and the system records the current height of the platform. Broad printer compatibility The CR-Touch only works on 3D printers with a 32-bit motherboard. Therefore, before you buy, please check whether your printer’s mainboard is an 8-bit or 32-bit mainboard. The levelling sensor can be used on these build platform surfaces: PEI Glass Metal Magnetic building boards Carborundum glass Easy to install and easy to use Download the CR-Touch program from Creality’s official website and copy it to TF/SD card. Insert the card directly into the 3D printer’s card slot. The program can be updated after switching on.
